Brazing materials come in shapes such as wires, boards, rods, and a combination of them can be processed into the appropriate shape for your brazing needs.
There are also powdered brazing materials, which can be mixed (with binders etc.) into a paste.
Selecting an appropriate shape is important depending on the brazing method and the base material.
We at Kinzoku Yousetsu, mold brazing materials into various shapes to suit our customers’ needs.
Not only do we provide cutting materials for manual feeding and coil materials for automatic machines,
but one of our strengths is forming brazing (preformed brazing) to be used as a set with base material parts.
Custom molding product examples
-
Rings
Size(Reference)[Wire diameter] 0.3φ～2.6φ
[Inner Diameter] 2mm～100mm -
Huck
Size(Reference)[Thickness] 0.2mm～0.4mm
[Inner Diameter] 4mm～25mm
[Width] 3mm～30mm -
Washer
Thickness(Reference)0.1mm～0.4mm
-
Coil
Size(Reference)[Wire Diameter] 0.3φ～
-
Cut
Size(Reference)0.8φ×500L、1.0φ×500L、1.6φ×500L
2.0φ×500L、2.4φ×500L etc. -
Bar
Size(Reference)[Wire diameter] 1.0φ～5.0φ
-
Board
Size(Reference)0.1mm～1.0mm
-
Others
Various ShapesWe can make L Shapes, Wide-U shape, amongst other irregular shapes
-
Powders and Pastes
Types[Powder] Silver Brazing Filler Metal, Nickel Brazil Filler Metal etc.
[Paste] Copper paste, etc.